32mm Planetary Gearbox Powder Metallurgy Gear
Gearbox Description
| Gearbox Description | |||||||
| Housing material | Bearing at output | Radial load (10mm from flange) | Shaft axial load | Shaft press fit force,max. | Radial play of shaft | Thrust play of shaft | Backlash at no-load |
| Metal | Sleeve bearings | ≤3Kgf | ≤2.5Kgf | ≤10Kgf | ≤0.08mm | ≤0.3mm | ≤3° |
| Metal | Ball bearings | ≤3.5Kgf | ≤2.5Kgf | ≤10Kgf | ≤0.05mm | ≤0.3mm | ≤3° |
Motor Shaft Pinion Specification
| Motor Shaft Pinion Specification | ||||
| Module | No. of teeth | Pressure angle | Hole diameter | Reduction ratio. |
| 0.5 | 11 | 20° | 2.28，2.48，2.98，3.16 | 1/5,1/19,1/27,1/71,1/100,1/139,1/264,1/516,1/721 |
| 0.5 | 17 | 20° | 2.28，2.48，2.98，3.16 | 1/4,1/14,1/51,1/189 |
Gearbox Specification
| Gearbox Specification | |||||||||||||
| Reduction ratio | 1/4 | 1/5 | 1/14 | 1/19 | 1/27 | 1/51 | 1/71 | 1/100 | 1/139 | 1/189 | 1/264 | 1/516 | 1/721 |
| Rated tolerance torque (Kg.cm ) | 2 | 2 | 4 | 4 | 6 | 8 | 8 | 10 | 10 | 12 | 12 | 12 | 12 |
| Max momentary tolerance torque (Kg.cm ) | 6 | 6 | 12 | 12 | 18 | 24 | 24 | 30 | 30 | 36 | 36 | 36 | 36 |
| Efficiency | 80% | 80% | 70% | 70% | 70% | 60% | 60% | 60% | 60% | 50% | 50% | 50% | 50% |
| Length（L-mm） | 22.1 | 22.6 | 28.5 | 28.5 | 28.5 | 34.9 | 34.9 | 34.9 | 34.9 | 41.3 | 41.3 | 41.3 | 41.3 |
| Weight（g） | 109 | 109 | 143 | 143 | 143 | 177 | 177 | 177 | 177 | 211 | 211 | 211 | 211 |
Mechanical Dimensions
| Mechanical Dimensions |
Download
Full Datasheet