Article List
- Hybrid Stepper Motor CodeH 20 1 - 303 06 D Shaft type : S=single, D=double, Blank=both Phase current (A) :0.6Torque (N.cm) : 303 Motor Type: 1=Square 1.8°, 2=Square 0.9°,technical support January 15, 2018
- PM Stepper MotorThe Permanent Magnet Stepper Motor has a stator construction similar to that of the single stack variable reluctance motor. The rotor consists of permanent magnet poles of high retentivity steel and is cylindrical in shape. The concentrating windings on diametrically opposite poles are connected intechnical support January 15, 2018
- Synchronous MotorMain Features of Synchronous Motors1. Synchronous motors are inherently not self starting. They require some external means to bring their speed close to synchronous speed to before they are synchronized.2. The speed of operation of is in synchronism with the supply frequency and hence for constanttechnical support January 15, 2018
- American Customer VisitingIn Jan. 2018, Mr. Matt, the technical engineer, from American CNC Machine company, visited I.CH stepper motor factory.
- Product Number Code For DC Gear MotorD 36 2 xxx - xxx 010= 1:10 , 300= 1:300 180 = 18kg.cm , 012=1.2kg.cm 2= DC Spur Gear Motor , 3= DC Planetary Motor Dimension of gearbox : 12,16,technical support February 10, 2018
- CAN busA Controller Area Network (CAN bus) is a robust vehicle bus standard designed to allow microcontrollers and devices to communicate with each other in applications without a host computer. It is a message-based protocol, designed originally for multiplex electrical wiring within automobiles to save otechnical support March 05, 2018
-
- American Customers VisitingIn Nov. 2017, Mr. Bob with his wife, the logistics manager, from American CNC Machine company, visited I.CH stepper motor factory.
- Stepper Motor Wiring OptionsThe basic operation of any stepper motor relies on the use of inductive coils which push or pulls the rotor through its rotation when they are energized. A pair of wire leads coming from a stepper motor will correspond to at least one of these windings and possibly more depending on the motor type.technical support March 05, 2018
- American Customer VisitingIn Oct. 2016, Mr. Nolan, the chief engineer, from American CNC Machine company, visited I.CH stepper motor factory.