P422H
I.CH
P422H
Planetary gearbox are used more and more widely. Based on the efficiency, durability and power, the performance of planetary gearbox is better than that of helical and spur gears. We provide the custom design service. Please contact us by your parameter (Torque, speed, Dimension, etc)
Housing material | Bearing at output | Radial load (10mm from flange) | Shaft axial load | Shaft press fit force,max. | Radial play of shaft | Thrust play of shaft | Backlash at no-load |
Metal | Sleeve bearings | ≤5Kgf | ≤3Kgf | ≤15Kgf | ≤0.08mm | ≤0.3mm | ≤3° |
Metal | Ball bearings | ≤8Kgf | ≤3Kgf | ≤15Kgf | ≤0.05mm | ≤0.3mm | ≤3° |
Planetary gearbox are used more and more widely. Based on the efficiency, durability and power, the performance of planetary gearbox is better than that of helical and spur gears. We provide the custom design service. Please contact us by your parameter (Torque, speed, Dimension, etc)
Housing material | Bearing at output | Radial load (10mm from flange) | Shaft axial load | Shaft press fit force,max. | Radial play of shaft | Thrust play of shaft | Backlash at no-load |
Metal | Sleeve bearings | ≤5Kgf | ≤3Kgf | ≤15Kgf | ≤0.08mm | ≤0.3mm | ≤3° |
Metal | Ball bearings | ≤8Kgf | ≤3Kgf | ≤15Kgf | ≤0.05mm | ≤0.3mm | ≤3° |
Motor Shaft Pinion Specification | |||||
Module | No. of teeth | Pressure angle | Helix angle | Hole diameter | Reduction ratio. |
0.6 | 9 | 20° | 18°(Left) | 3.15 | 1/25 |
0.6 | 12 | 20° | 18°(Left) | 3.98 | 1/20,1/100,1/120,1/500,1/600,1/720,1/1062, |
1/2500,1/3000,1/3600 | |||||
0.6 | 15 | 20° | 18°(Left) | 4.98 | 1/17,1/84,1/294,1/1470 |
0.6 | 18 | 20° | 18°(Left) | 4.98 | 1/15,1/51,1/64,1/180,1/222 |
Motor Shaft Pinion Specification | |||||
Module | No. of teeth | Pressure angle | Helix angle | Hole diameter | Reduction ratio. |
0.6 | 9 | 20° | 18°(Left) | 3.15 | 1/25 |
0.6 | 12 | 20° | 18°(Left) | 3.98 | 1/20,1/100,1/120,1/500,1/600,1/720,1/1062, |
1/2500,1/3000,1/3600 | |||||
0.6 | 15 | 20° | 18°(Left) | 4.98 | 1/17,1/84,1/294,1/1470 |
0.6 | 18 | 20° | 18°(Left) | 4.98 | 1/15,1/51,1/64,1/180,1/222 |
Gearbox Specification | ||||||||||||||||||
Reduction ratio | 1/15 | 1/17 | 1/20 | 1/25 | 1/51 | 1/64 | 1/84 | 1/100 | 1/120 | 1/180 | 1/222 | 1/294 | 1/500 | 1/600 | 1/720 | 1/1062 | 1/1470 | 1/2500 |
Rated tolerance torque (Kg.cm Max.) | 3 | 8 | 8 | 8 | 18 | 18 | 18 | 20 | 20 | 25 | 25 | 25 | 30 | 30 | 30 | 30 | 30 | 30 |
Max momentary tolerance torque (Kg.cm ) | 24 | 24 | 24 | 24 | 54 | 54 | 54 | 60 | 60 | 75 | 75 | 75 | 90 | 90 | 90 | 90 | 90 | 90 |
Efficiency | 80% | 70% | 70% | 70% | 60% | 60% | 60% | 60% | 60% | 50% | 50% | 50% | 50% | 50% | 50% | 40% | 40% | 40% |
Length (L-mm) | 39.2 | 39.2 | 39.2 | 39.2 | 45.9 | 45.9 | 45.9 | 45.9 | 45.9 | 52.6 | 52.6 | 52.6 | 52.6 | 52.6 | 52.6 | 59.6 | 59.6 | 59.6 |
Weight(g) Ball bearings | 191 | 191 | 191 | 191 | 231 | 231 | 231 | 231 | 231 | 281 | 281 | 281 | 281 | 281 | 281 | 326 | 326 | 326 |
Gearbox Specification | ||||||||||||||||||
Reduction ratio | 1/15 | 1/17 | 1/20 | 1/25 | 1/51 | 1/64 | 1/84 | 1/100 | 1/120 | 1/180 | 1/222 | 1/294 | 1/500 | 1/600 | 1/720 | 1/1062 | 1/1470 | 1/2500 |
Rated tolerance torque (Kg.cm Max.) | 3 | 8 | 8 | 8 | 18 | 18 | 18 | 20 | 20 | 25 | 25 | 25 | 30 | 30 | 30 | 30 | 30 | 30 |
Max momentary tolerance torque (Kg.cm ) | 24 | 24 | 24 | 24 | 54 | 54 | 54 | 60 | 60 | 75 | 75 | 75 | 90 | 90 | 90 | 90 | 90 | 90 |
Efficiency | 80% | 70% | 70% | 70% | 60% | 60% | 60% | 60% | 60% | 50% | 50% | 50% | 50% | 50% | 50% | 40% | 40% | 40% |
Length (L-mm) | 39.2 | 39.2 | 39.2 | 39.2 | 45.9 | 45.9 | 45.9 | 45.9 | 45.9 | 52.6 | 52.6 | 52.6 | 52.6 | 52.6 | 52.6 | 59.6 | 59.6 | 59.6 |
Weight(g) Ball bearings | 191 | 191 | 191 | 191 | 231 | 231 | 231 | 231 | 231 | 281 | 281 | 281 | 281 | 281 | 281 | 326 | 326 | 326 |
Mechanical Dimensions |
Mechanical Dimensions |
Full Datasheet
Full Datasheet